Adapter/Controller for 1 to 4 Channel 11-pin Leslies... NO Leslie Cable Needed!!

Description

This attractive "Classics Revived" custom adapter/footswitch package has been specifically designed, assembled, and tested for use with 11-pin Leslie cabinets.  It's an improved version that now supports Leslies with up to FOUR discrete audio channels!  Compatible Leslie models include:  130, 330, 412, 415, 520, 705, 715, 720, 730, 740, 750, 771, 815, 820, 860, 971, HL422, HL722, and HL822.
Together, the "Handcrafted-in-the-USA" adapter and matching footswitch provide safe, low-voltage power and speed control, offering STOP, SLOW, and FAST motor operation.
Installation is easy and, depending on your Leslie's 11-pin plug position (more on that in *footnote below), requires no modification to the Leslie.  The genuine Amphenol-brand socket of the L-shaped adapter attaches directly to the 11-pin plug on the cabinet's back panel, REPLACING that long, bulky cable a Leslie ordinarily requires.  [Translation:  If you lack a Hammond/Leslie 11-pin cable, you can skip buying one for 0 or more.  Already have one?  Then you can sell it for as much, since you'll no longer need it!]
Audio input is via the adapter's pair of 1/4-inch "TRS" phone jacks, with Channel 1 providing the full rotary effect (for all but Leslie Model 520 which has no rotating parts) and Channels 2 through 4 (as applicable, also referred to as "Main" and "Aux 1" and "Aux 2") driving your cabinet's stationary speakers.  If your 11-pin Leslie requires a "hotter" signal level, then a modern, inexpensive preamp (such as the A.R.T. Tube MP, not included) can be easily accommodated.
Whether you play guitar or keyboards or a wide variety of instruments (plus voice) and already own or can snag an 11-pin Leslie for a decent price, here's a way to incorporate that authentic rotary sound into your performance or recording set-up... seamlessly, using standard connectors and cords!
What you get with purchase:
- Brand-new dual footswitch for three-speed control
- Brand-new adapter with FOUR discrete audio channels and built-in Amphenol 11-pin socket
- Brand-new 15' stereo (TRS) footswitch cord
- FREE SHIPPING--fast, tracked and insured via USPS!"
Any questions about using this controller with your equipment, please feel free to message me before purchasing.  Sorry, no returns.
* Your Leslie's 11-pin plug will have an index rib on the center post which ensures correct alignment of the numbered pins when the socket, which has a corresponding groove, is attached.  If the rib is on top, the adapter will attach in its optimum position, vertically with the on-off switch facing upward.  Floor clearance may be an issue if Leslie isn't on wheels and the rib is below the center post, as the adapter will attach in an inverted position.  Removing the lower back panel to unscrew and flip the plug is fairly simple, and should resolve this.  Some 11-pin Leslies, however, have a power cord receptacle directly above the 11-pin plug, and so the rib on the plug's center post is typically on a diagonal, either to the bottom left or the upper right.  In such a case, use the plug as-is or flip it so the adapter fits in the most convenient position.