Digital PH Soil Tester Water Moisture Temperature Sunlight Test Meter Plant USA

Description

Home
Payment
Shipping
About us
Contact us
Store Categories
Store Categories
Other
Details
Description:
Electronic display 4 in 1 soil analyzer is the latest soil speed measurement device, mainly to test the soil PH, moisture, temperature and light intensity of plants, the use of a section 9V Carbon battery. This instrument through the liquid crystal display measurement parameters. The instrument also has low power indication and automatic power off function. It saves time and energy, high efficiency. This instrument is suitable for flowers and grass planting, garden greening.
Specification:
1. Measure the light intensity of the current environment
LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH+
2. Measuring the moisture content of the soil
DRY+, DRY, NOR, WET, WET+
3. Measure the temperature of the soil. The temperature measurement range is -9~+50°C (16~122°F). (Accuracy: 1°C/1°F)
4, measuring the pH of the soil, PH measurement range: 3.5-9.0
Feature:
-- Measures soil pH value, moisture, temperature and sunlight intensity
-- Large and easy-to-read LCD screen
-- Low battery indication
-- 8"(200mm) long probe to reach root-deep into the soil being tested
Specifications:
-- Test objects: Sunlight, moisture, PH value, temperature
-- pH measurement range: 3.5-9.0 (display resolution 0.5)
-- Soil temperature measurement range: -9℃～ +50℃(16℉～122℉) (display resolution 1℃/1℉)
-- Working current: < 30mA
-- Operating temperature: +5℃～ +40℃ (41℉ ～104℉)
-- Working humidity: 5% ～95% RH non-condensing
-- Storage condition: -20 ℃～+50℃, ≤85%(humidity)
-- Power source: one 9V battery
(
Not
included)
Package Include:
1 X 4-in-1 soil tester (
Not include the battery
)
1 X User manual
Using Method:
1. Before use
, please install the battery, remove the probe protection cover
2. Light Measurement:
A.PressONButton to open the instrument
B.The highest point light source light sensor window.
C.The intensity of the current light will be displayed on the liquid crystal display.
be careful: Please do not block the light or light sensor to create a shadow
3. PH Range Measurement:
A.The back of thePH/C Push button toPHPosition.
B.To insert the probe into the soil, the test should be carried out as soon as possible.
C.Press [ONButton to start measuring.
D.Test PH Value will be displayed on the liquid crystal display
E.Multiple measurements for several times to get the exact value of the.
4. Moisture Measurement:
A.The back of the PH/C Push button toPosition of C
B.As far as possible to insert the soil vertically.
C.PressNOKey to start measurement
D.The value of the soil moisture will be displayed on the LCD screen.
E.Multiple measurements for several times to get the exact value of the.
5. Temperature Measurement:
A.When measuring humidity, the soil temperature will be displayed on the LCD screen at the same time.
B.Press [C/FahrenheitOFF] button to set the humidity is Fahrenheit or centigrade.
Be carefulIf the user does not insert the probe into the soil, it is shown that the temperature of the outer space is accurate.
Note:
1. Perpendicular to the probe, in the middle of the edge of the plant stem.
2. Please gently push the soil to avoid damaging the probe.
3. If the measurement of the soil is too dry or fertile can not be measured accuratelyPHValue, the user can sprinkle a little water, half an hour after the measurement again
Shipping Policy
Payment Method
Returns Policy
Shipping Policy
Payment Method
Returns Policy
Home
Payment
Shipping
About us
Contact us
Copyright©2018 datacaciques
On Jul-08-21 at 01:27:16 PDT, seller added the following information: