Milwaukee Pocket pH Tester with Screw-driver, Batteries, Calibration Solution

Description

This is a pH600 unit supplied complete with protective cap, screw-driver, batteries, 7.01 Calibration solution and instructions. Testing Environment: 0 to 50 degree C; max RH 95 percent 3 x 1.5V Alkaline battery; 700 hours of use, unit measures 150mm length by 30mm width by 24mm height.
Comes with a factory warranty from Milwaukee. Needs to be stored correctly to ensure long lifetime. Part#pH600-BOX.
The Milwaukee Instruments pH600 is a compact pH tester with a narrow probe for use in small samples or test tubes, and has manual two-point calibration, a single-line LCD screen, a replaceable electrode, and a low power demand.
Some units have a small amount of salty crust evident, this is normal as the sensor is stored in a salt solution to preserve its life. This can be washed off with tap water and the unit will calibrate normally.
A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. The single-line LCD screen of this meter shows the current measurement. The meter has manual temperature compensation and manual one-point calibration through a trimmer on the top. Three 1.5V button batteries provide approximately 700 hours of use. The meter also comes with a calibration screwdriver and instructions.
pH range
0.0 to 14.0
pH resolution
.1
pH accuracy
+ or - .1
Operating temperature
0 to 50 degrees C (32 to 122 degrees F)
Operating relative humidity
95 percent
Dimensions
150 x 30 x 24mm/5.9 x 1.2 x 0.9 inches (H x W x D)
Meter weight
85g/3.0oz.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some testers have an internal sensor, and may have a tip and body that fit inside of a container for measurement. A meter is commonly used in many different environments from laboratories to field research and manufacturing facilities. Researchers, manufacturers, and hobbyists use a pH meter in aquaculture, agricultural, wine-making, and water-testing, and for scientific applications.
For more information see :  [link removed] and calibration
http://www.youtube.com/watch?v=8vxC9R96ZV4
Milwaukee Policy
If you are purchasing this product you agree to contact Milwaukee Instruments directly if you have any issues. This is recommended by Milwaukee Instruments to quickly address customer issues and provide their top notch customer support. Due to the complex issues of their products and vast applications they handle the tech support as they are a lot smarter than we are.
If you have any questions on:
• Dead on Arrival
• Product set up
• Application Use
• Warranty Use
Customer Support Milwaukee Instruments, Inc.
2950 Business Park Drive - Rocky Mount, NC 27804 - U.S.A.
Tel.: +1.252.443.3630 - Fax: +1.252.443.1937