-40%
Oxine AH Sanitizer Disinfectant 12 pack of 3.2 Fungicidal, Bacterial, Virucidal
$ 142.55
- Description
- Size Guide
Description
OXINE-AD comes in a 12 pack of 3.25 oz. concentrate and 12 ea 10 gram activator packs (1 – 3.25 oz. concentrate and 1 – 10 gram activator pack is mixed with one gallon of water).n addition to its EPA registration, OXINE-AD® is approved by the FDA and USDA to ensure the user of its efficacy and safety.
One of OXINE-AD’s trademarks qualities is its safety rating by the EPA due to its low toxicity. Rated as a category III, OXINE-AD® does not leave an active chemical residue, and quickly degrades to simple table salt.
OXINE-AD® does not use any propellants or flammable ingredients, enhancing its safety qualities.
OXINE-AD® is a no-rinse product, making it very easy to apply. Once OXINE-AD® is applied, it dries residue-free.
USE DIRECTIONS
OXINE-AD® should be applied by the applicator wearing a NIOSH-MSHA approved respirator with an Organic Vapor/Acid Gas Cartridge. Secure proper respiratory and eye wear protection prior to activation.
1. Pour 3.25 fl. oz. of OXINE® concentrate into a suitable mixing container.
2. Add 10 grams of OXINE® activator crystals to the OXINE® concentrate.
3. Mix and let stand for 5 minutes before dilution.
4. Prepare solution in a well-ventilated area. Avoid breathing fumes that may be produced while crystals are dissolving.
5. After mixing, add one gallon of clean water to the activated OXINE® solution. Final use solution is 500 ppm. Mixed solution is good for up to one week when stored in a closed container away from direct sunlight.